Creative Engineering - Header
Skid Mounted Process Equipment — Creative Engineering
Home › Turnkey Projects
Turnkey Projects

Turnkey Process Plant Projects

One partner from concept to commissioning. We engineer, fabricate, inspect, install and commission your process system, so you deal with one team, one schedule and one point of responsibility.

View Completed Projects
1 / 3
Hydrogen peroxide plant equipment package – Creative Engineering
Plant Equipment Package
Process plant equipment ready for dispatch – Creative Engineering
60 MTPD H₂O₂ Plant
ASME U-Stamp condensate blowcase – Creative Engineering
ASME U-Stamp Equipment

What Is a Turnkey Process Plant Project?

In a turnkey project, one company takes responsibility for delivering a working plant section or process system. You share the process requirement; we handle the engineering, equipment manufacturing, inspection, installation and commissioning, and hand over a system that is ready to run.

For chemical, pharmaceutical and process industries, this removes the gaps between separate designers, fabricators and erection contractors – the gaps where most delays, rework and cost overruns begin. Because Creative Engineering manufactures the equipment in its own facility, design, fabrication and quality stay under one roof. See our manufacturing capability or compare with our EPC services.

Our Turnkey Scope – From Concept to Commissioning

Every turnkey project is scoped to your process. These are the stages we take responsibility for.

01 · Concept & Feasibility
  • Feasibility and concept studies
  • Process flow development (PFD)
  • Preliminary equipment sizing
  • Technology selection and evaluation
  • Risk and HAZOP identification
  • Conceptual layout planning
02 · Basic & Detail Engineering
  • P&ID development
  • Equipment datasheets and specifications
  • Process system engineering and custom equipment design
  • Piping design and layout
  • Civil and structural drawings
  • Instrumentation and control design
  • Material take-off (MTO)
03 · Equipment Manufacturing
  • In-house fabrication of reactors, pressure vessels, heat exchangers, distillation columns, storage tanks and skid-mounted systems
  • Structural fabrication, pipe spools, platforms and ladders
  • Stainless steel, carbon steel, low and high alloy steel, clad steel and exotic alloys
  • Machining, agitators, electropolishing, blasting, painting and corrosion-resistant coating or lining
04 · Inspection & Testing
  • Inspection and Test Plans (ITP) for every project
  • NDT Level II inspection and destructive testing (DT)
  • Certified welding procedures and qualified welders (GTAW, SMAW, SAW, FCAW)
  • Complete quality documentation to the agreed design code
05 · Installation & Commissioning
  • Installation and commissioning at your site
  • Site supervision
  • On-site fabrication support
06 · Handover & Support
  • As-built documentation
  • Maintenance and support after handover

Turnkey Systems We Deliver

Complete Distillation Systems
Distillation columns, reboilers, heat exchangers, receivers and solvent strippers, engineered as one system.
Distillation systems →
Reaction Systems
Reactors with the right agitator and heat transfer (jacket, limpet coil or internal coil), with receivers and the connecting piping.
Reactors →
Skid-Mounted Process Systems
Fully integrated, pre-assembled systems on a structural skid frame with piping, instrumentation and auxiliary components, factory-tested and ready for installation.
Skid systems →
Storage & Tank Farms
Storage tanks, square tanks and silos with structures, platforms and ladders.
Storage tanks →
Plant Equipment Packages
Complete sets of process equipment for a new plant or an expansion, built to your drawings, design code and material of construction.
All products →

Industries We Serve

Turnkey process systems for chemical and process plants across these sectors:

Why Choose Creative Engineering for Your Turnkey Project

Single Point of Responsibility
Engineering, fabrication, inspection and commissioning under one team.
Own Manufacturing Facility
1,75,000 sq ft across two dedicated manufacturing units, so schedule and quality are in our control.
Code-Certified Fabrication
ASME U-Stamp and R-Stamp, National Board (NB), IBR, ISO 9001, ISO 3834, ISO 14001 and ISO 45001.
Every Material
Stainless steel grades, carbon steel, low and high alloy steel, clad steel and exotic alloys.
Domestic & Export Experience
Equipment supplied across India and to export projects, including the Middle East and South-East Asia.
Established in 2015
A dedicated engineering, quality and site team behind every project.

Project Reference

Hydrogen peroxide plant equipment – Creative Engineering
Hydrogen Peroxide Plant – 60 MTPD H₂O₂ (Export, Indonesia)
Plant equipment package: 32 equipments manufactured and dispatched for the plant.
Condensate blowcase – Creative Engineering
Condensate Blowcase (Export, Saudi Arabia)
Built to ASME with U-Stamp.

View all completed projects →

What We Need to Quote Your Turnkey Project

Share as much of the following as you have. Our engineering team will review it and propose a turnkey scope.

  1. Process description and required capacity
  2. PFD, P&ID or process data, if already available
  3. Site location and layout or space constraints
  4. Design codes and standards to be followed
  5. Preferred materials of construction
  6. Utilities available at site (steam, thermic fluid, cooling water, power)
  7. Scope split – what you will handle and what you want us to handle
  8. Required schedule

Planning a New Plant Section or an Expansion?

Request a Quote

Turnkey Project Quotation

Share your process requirement and our engineering team will propose a turnkey scope and quotation.

Email Us
Technical Support

Speak with Our Engineers

Questions about scope, design codes, materials or site work? Our engineering team will help you define the right turnkey package for your process.

Turnkey Project FAQs

What is included in a turnkey project from Creative Engineering?

Engineering, in-house equipment manufacturing, inspection and testing, installation and commissioning at site, site supervision, and support after handover. The exact scope is agreed for each project.

What is the difference between turnkey and equipment supply?

In equipment supply, we build equipment to your design and you integrate it into the plant. In a turnkey project, we take responsibility from engineering to commissioning and hand over a working system.

Do you design the plant, or work to our design?

Both. We can start from concept and feasibility, or work from your PFD, P&ID and drawings.

Which codes and certifications do you work to?

We hold ASME U-Stamp and R-Stamp, National Board (NB), IBR, ISO 9001, ISO 3834, ISO 14001 and ISO 45001, and build to the design code specified for your project.

Do you take up turnkey projects outside Gujarat or for export?

Yes. We supply across India and for export projects.

How do I get a turnkey quotation?

Use the Request a Quotation form on this page, email sales@creative-engineering.in or call +91 91743 99000.

ASME
U Stamp
R Stamp
NB
IBR
MAZAGON DOCK
ISO 9001
ISO 3834
ISO 14001
ISO 45001